Shotcrete Pool Structure Estimate
Use this calculator to create a preliminary structural pool estimate from the pool perimeter, average depth, water-surface area, pricing multiplier, and fixed bulk cost.
SHOTCRETE SALES ESTIMATOR
Shotcrete Pool Calculator
Calculate the estimated shotcrete pool cost using pool area, perimeter, average depth, your pricing multiplier, and a fixed bulk cost. Use manual overrides for freeform pools.
Information used in the estimate
Enter the pool length, width, shallow depth, and deep depth for a rectangular pool. For a freeform pool, turn on the manual override and enter the measured perimeter and water-surface area.
- Average depth is calculated from shallow and deep depths.
- Total square feet equals perimeter × average depth + area.
- The estimate equals total square feet × multiplier + bulk cost.
Preliminary estimate only
This calculator is a sales and budgeting tool, not an engineering takeoff or construction contract. Confirm shell thickness, structural steel, soil conditions, access, pump requirements, waste, taxes, engineering, permits, and local code requirements before issuing a final price.
When enabled, the calculator ignores the rectangle dimensions for perimeter and area.
Totals update automatically whenever a measurement, multiplier, bulk cost, or freeform override value changes.
ESTIMATED SHOTCRETE COST$0Open Quote Builder ↗
Calculation method
Average Depth = (Shallow Depth + Deep Depth) ÷ 2Total Sq Ft = (Perimeter × Average Depth) + Pool AreaEstimated Cost = (Total Sq Ft × Multiplier) + Bulk Cost
Rectangle pools automatically use perimeter = 2 × (length + width) and area = length × width. Enable the manual override for freeform pools and enter the measured perimeter and water-surface area. This is a preliminary sales estimate; verify structural engineering, thickness, access, soil, reinforcing steel, waste, taxes, and local requirements before contracting.